thick film process
英 [θɪk fɪlm ˈprəʊses]
美 [θɪk fɪlm ˈprɑːses]
网络 厚膜工艺
双语例句
- Thick Film screen printing is a process in which paste wet the ceramic substrates.
厚膜丝网印刷是浆料润湿陶瓷基板的过程。 - This pa-per introduces thick film assembling technique, equipment, technical parameters and testing methods while narrating the manufacturing process of thick film circuits.
在叙述点火模块厚膜电路的生产过程中系统介绍了厚膜封装工艺、相关设备、技术参数和检测方法。 - PRIMARY FUNCTION OF POSITION: Responsible for the product modification and localization of thick film materials, formula and process developing.
主要工作职责：负责厚膜浆料产品的产品研发，本地化，工艺改进，及浆料工艺方法改进。 - The customer can use OPP by standard thick film printing process with curing temperature 200 ℃.
采用厚膜印刷工艺，200℃固化。 - Thick film direct writing process
厚膜直接描绘工艺 - The thick film NTC thermistors prepared by this thick film pastes have excellent process characteristics and thermal stability above 30 × 10~ (-2) of the quality fraction of the glass agent.
当玻璃助剂质量分数为30×10-2以上时，采用本工艺制备的厚膜NTC热敏电阻器具有良好的工艺性和热稳定性。 - Study of Thick Film Process for Carbon Nanotubes Field Emission Cathode
碳纳米管场发射阴极的厚膜工艺研究 - During the growth of diamond thick film in EACVD process, the substrate temperature, hot-filament temperatare/ current and gas supply flowrate are all the important parameters.
在EACVD金刚石膜生长过程中，衬底温度、热丝温度、热丝电流和气源流量等是其重要的工艺参数。 - The influence of operating condition on Gel tape casting process is studied. The bilayers exhibit superior ME coupling compared to thick film composites prepared by tape casting process.
讨论了工艺条件对成型的影响。相较于涂敷膜（tapecasting）复合样品，该双层膜显示出更为优良的ME耦合效应。 - The sensor was based on the solid-electrolyte NASICON that was spreaded evenly on the Al2O3 ceramic pipe and then sintered into a thick film. A heating wire passed through the pipe interior providing heat. NASICON was prepared by sol-gel process.
该传感器是将溶胶–凝胶法制备的NASICON材料均匀涂敷在Al2O3陶瓷管上，烧结形成厚膜，加热丝穿过管内提供热量。 - The performance of thick film paste for AlN substrate was summarized, relating to manufacture of metallic powder, study of bonding manner and improvement on firing process.
介绍了AlN基片所用厚膜浆料的产品性能。从金属粉体的制备，粘结方式探索和烧结工艺的改进等方面综述了该领域的研究进展。 - Based on the structure of ceramic substrate/ internal electrodes/ thick dielectric film/ light-emitting layer/ thin dielectric film/ ITO, the fabrication process of ZnS: Mn phosphor layer has been investigated to improve the brightness of inorganic thick dielectric electroluminescent ( TDEL) devices.
为了提高陶瓷厚膜无机电致发光显示器的亮度，采用陶瓷基片/内电极/陶瓷厚膜/发光层/上绝缘层/透明电极的器件结构系统研究了ZnS∶Mn发光层的制备工艺。 - Fabricated with thick film process technology, the device has the advantages of wide operation range ( 10-48 V), high output current ( 3 A), high speed and low power. The use of the device also simplifies the external design of the system.
该电路采用厚膜工艺技术制造，具有工作电压范围宽（12~48V）、输出电流大（3A）、速度快、功耗低等特点，简化了外围设计。 - Thick film process used to prepare carbon nanotube ( CNT) cathode is studied. By investigation of CNT paste and sintering process, we can obtain uniform, flat CNT thick films with good field emission performance.
研究了制备碳纳米管（CNT）场发射阴极的厚膜工艺，通过浆料配方和烧结工艺等方面的探索，在Si基底上制作了均匀、平整、场发射特性良好的CNT厚膜。 - The thick aluminum film is grown under high temperature in the BCD manufacturing process.
在某一BCD制程生产过程中，要求在比较高的温度条件下生长厚铝。 - Although small driving voltage could be obtained, NG FED structure is not suitable for thick film process considering of the process and working principal. So it is difficult to cut down the fabrication cost, which is essential for large panel display.
虽然前栅极结构可以获得较小的驱动电压，但是无论从工艺制造还是器件工作特性方面考虑，均不适合采用厚膜制造工艺，因此这种结构不易降低制造成本，在大屏幕显示的应用方面非常困难。 - Switching power supply based on DC/ DC thick film hybrid integrated process is by virtue of its high reliability and are widely used in military, aviation, aerospace and other fields.
基于厚膜混合集成工艺的DC/DC开关电源更是凭借其高可靠性而广泛应用于军工、航空、航天等领域。